Opto Engineering® - 20 years
Home Optics Telecentric lenses TCEL series
TCEL075
Specifications
Downloads
Compatible products
Main optical specifications
Magnification (x) 0.750
Magnification ranges at -2 dpt to +3 dpt (x) 0.744 - 0.763
Image circle diameter (mm) 11.0
Max sensor size 2/3″
Object field of view
1/3” (1) (mm × mm) 6.40 x 4.80
1/2.5” (1) (mm × mm) 7.60 x 5.71
1/2” (1) (mm × mm) 8.53 x 6.40
1/1.8” (1) (mm × mm) 9.51 x 7.11
2/3” (1) (mm × mm) 11.33 x 9.45
Advanced optical specifications
Working distance (2) (mm) 132.3
Working distance range (3) (mm) 146.1 - 112.5
Working ƒ/N (4) 12
Telecentricity typical (max) (5) (deg) < 0.07 (0.1)
Telecentricity max (6) (deg) < 0.2
Distortion typical (max) (7) (%) < 0.1 (0.2)
Distortion max (6) (%) < 0.2
Depth of field (8) (mm) 1.10
Resolution (9) (μm) 10
Liquid lens specifications
Liquid lens model Optotune EL-16-40
Temperature sensor Yes
Focal power mode Yes
Response time (10) (ms) 5
Setting time (10) (ms) 25
Current range (mA) -500 to +500
Repeatability using focal power mode (dpt) ±0.05 (small steps); ±0.1 (large steps)
Lifecycles (10%-90% sinusoidal) >1,000,000,000
Connector HR10A-7R-6PB
Mechanical specifications
Mount C
Phase adjustment (11) Yes
Length (12) (mm) 155.0
Front diameter (mm) 37.7
Mass (g) 424
Environmental specifications
Operating temperature (°C) 0-40
Storage temperature (°C) 0-50
Operating relative humidity (%) 20-85, non condensing
Installation Indoor use only

Last update 20 Oct 2023

ROHS
REACH
WEEE

Notes

  1. Field of views are calculated at 0 dpt power of the liquid lens.
  2. Working distance (nominal): distance between the front end of the mechanics and the object at 0 pdt power of the liquid lens.
  3. Minimum and maximum working distance are reported at nominal range of the liquid lens; maximum excursion may be larger.
  4. Working f-number (wf/N): the real f-number of a lens in operating conditions.
  5. Maximum angle between chief rays and optical axis on the object side, evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
  6. Maximum values calculated in the range -2 to +3 dpt of the liquid lens.
  7. Percent deviation of the real image compared to an ideal, undistorted image, , evaluated at 0 dpt power of the liquid lens. Typical (average production) values and maximum (guaranteed) values are listed.
  8. At the limits of the depth of field, the image can still be used for measurements. For a very sharp image, however, only half of the depth of field should be considered. Pixel size used for calculation is 3.45 μm.
  9. Object side, calculated with the Rayleigh criterion with λ= 520 nm
  10. Typical at 30°C, 0 to ±250 mA step.
  11. Indicates the availability of an integrated camera phase adjustment feature.
  12. Measured from the front end of the mechanics to the camera flange.

Ordering information

Hirose cables and liquid lens controller sold separately.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Technical documents

Product user guide
Back focal adjustment

Datasheet

Download datasheet

Layout files

DXF
IGS
PDF
STEP
SLDPRT
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
ITA50-GM-10C-EL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA50-GC-10C-EL
Area scan camera 2464 x 2056 MP, Sony IMX264, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA81-GM-20C-EL
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Mono, 1 GigE, POE, C mount, with integrated liquid lens controller
ITA81-GC-20C-EL
Area scan camera 2856 x 2848 MP, Sony IMX546, CMOS Global shutter, 2/3", Color, 1 GigE, POE, C mount, with integrated liquid lens controller
LTCLHP016-R
Telecentric HP illuminator, beam diameter 20 mm, red, 625 nm
LTCLHP016-G
Telecentric HP illuminator, beam diameter 20 mm, green, 525 nm
LTCLHP016-B
Telecentric HP illuminator, beam diameter 20 mm, blue, 460 nm
LTCLHP016-W
Telecentric HP illuminator, beam diameter 20 mm, white, 6000 K
LTRN016RD
Ring LED illuminator, inner diameter 37.7 mm, straight type, red, 630 nm
LTRN016GR
Ring LED illuminator, inner diameter 37.7 mm, straight type, green, 525 nm
LTRN016BL
Ring LED illuminator, inner diameter 37.7 mm, straight type, blue, 470 nm
LTRN016NW
Ring LED illuminator, inner diameter 37.7 mm, straight type, white, 6300 K
CMBS series
CMBS series
45° beam splitters
CMBS016
45° beam splitter with mount for 37.7 mm clamping diameter optics
CMHO series
CMHO series
Clamping mechanics for lenses
CMHO016
Clamping mechanics for TCxx016 lenses and LTCLHP016-X illuminators
CBGPIO6PMF-3M
6 Pin Hirose Male - Female moulded connector cable, 3 m
CBGPEL12P6P-03M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, 0.3 m
CBGPIO12PY6P-3M
I/O cable, side 1 HIROSE 12 pin, side 2 HIROSE 6 pin, side 3 cable end, 3m+0.3m
Request a quote
Add this product to the quote request list.