Optics

Lighting

Cameras

Software

Accessories

AI Vision Units

Resources

TC4MHR192-C

High resolution telecentric lens for 1.2″ detectors, magnification 0.092x, C-mount

Download datasheet

Specifications

Magnification	(x)	0.092
Image circle Ø	(mm)	21.6
Object field of view 8	(mm x mm or Ø)
with IMX174/IMX249 13.3 mm diag w x h 11.35 x 7.13		123.32 x 77.46
with IMX255/IMX267 16.1 mm diag w x h 14.19 x 7.51		154.24 x 81.63
with IMX253/IMX304 17.6 mm diag w x h 14.16 x 10.37		153.90 x 112.73
with KAI-4022/4021 21.5 mm diagonal w x h 15.2 x 15.2		166.1 x 166.1
with KAI-08050 22.6 mm diagonal w x h 18.1 x 13.6 (7)		197.8 x 148.6
Optical specifications
Working distance (1)	(mm)	527.6
wF/# (2)		16
Telecentricity typical (max) (3)	(deg)	<0.05 (0.10)
Distortion typical (max) (4)	(%)	<0.04 (0.10)
Field depth (5)	(mm)	141.8
CTF@ 50 lp/mm	(%)	> 30
Mechanical specifications
Mount		C
Phase adjustment(9)		Yes
Length (6)	(mm)	679.1
Diameter	(mm)	260
Mass	(g)	10031

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F-number (wF/#): the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5 μm.
Measured from the front end of the mechanics to the camera flange.
With KAI-08050 (22.6 mm diagonal) detectors, the FOV of TC4MHRyyy-x lenses may show some vignetting at the image corners.
For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the detector.

Dimensions

2D dimensions

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

PDF DXF IGS STEP

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State (US)

Your message

Copy the Opto Security Number below
(4 characters)

* After submit we'll ask you to check your consense to use Your data

Compatible products

LTCLHP192‑R	Telecentric HP illuminator, beam diameter 250 mm, red
LTCLHP192‑G	Telecentric HP illuminator, beam diameter 250 mm, green
LTCLHP192‑W	Telecentric HP illuminator, beam diameter 250 mm, white

CMHO192R

Clamping mechanics for TCxx192 lenses and LTCLHP192-X illuminators rotation type

TCFILTER

Filter mount for telecentric lenses

Sitemap

TERMS AND CONDITIONS OF USE

All materials on this website www.opto-engineering.com (and all other possible local domains of Opto Engineering), including but not limited to: audio, images, software, text, video clips, design, structure, selection, coordination, expression (next - the "Content"), contained on this website are protected by copyright under Italian copyright law, international conventions and other copyright laws.

Any copying, posting, reproduction, public displaying, modification, translation, distribution or other unauthorized use of the Content (including any portion or version thereof) is prohibited. Nevertheless, users of this website have the limited permission to view, print and distribute the Contents for personal informational purposes so long as any copy or other reproduction includes the above copyright notice. All other actions should be previously authorized in written by Opto Engineering.

You agree to follow all instructions on this website limiting the way you may use the Content.

The products, processes, technology and related information described in this website may be covered by one or more issued/pending Opto Engineering patents. No license or other intellectual property right are granted or conferred by this website or by anything appearing herein to such Opto Engineering products, processes or technologies.

On this website there are also represented the proprietary logos, service marks and trademarks. By making them available on this website, Opto Engineering is not granting any license to utilize those proprietary logos, service marks, or trademarks. Any unauthorized use of the Content may violate copyright laws, trademark laws, the laws of privacy and other laws connected.

If you send any communications or materials to the website by electronic mail or otherwise, including any comments, data, questions, suggestions, or the like, all such communications are, and will be treated as, non-confidential and non-proprietary. In consequence, you give up any claim that any use of such material violates any of your rights including moral rights, privacy rights, proprietary or other property rights, publicity rights, rights to credit for material or ideas, or any other right, including the right to approve the way Opto Engineering uses such material.

This website may contain links to other Internet websites on the World Wide Web. Opto Engineering provides such links for your convenience only, and is not responsible for the content of any website linked to or from this website. Links from this website to any other website do not mean that Opto Engineering approves of, endorses, or recommends that website. Opto Engineering disclaims all warranties, express or implied, as to the accuracy, legality, reliability, or validity of any content on any other website.

The product and/or service information set forth in this website may contain errors and omissions, may be outdated. No statement, representation or other information contained in this website should be construed as binding upon Opto Engineering contractually or otherwise the basis for any express or implied warranty. Please contact Opto Engineering for the most up-to-date information regarding specific products and services. Opto Engineering may also add, change, discontinue, remove, or suspend any other Content posted on this website, including features and specifications of products described or depicted on the website, temporarily or permanently, at any time, without notice and without liability.

Opto Engineering may add to, change, or remove any part of these Terms and Conditions of Use at any time, without notice. Any changes to these Terms and Conditions of Use or any terms posted on this website apply as soon as they are posted. By continuing to use this website after any changes are posted, you are indicating your acceptance of those changes.

These Terms and Conditions of Use and any additional terms posted on this website together constitute the entire agreement between Opto Engineering and you with respect to your use of this website. If for any reason a court of competent jurisdiction finds any provision of these Terms and Conditions of Use, or portion thereof, to be unenforceable, that provision shall be enforced to the maximum extent permissible so as to effect the intent of this agreement, and the remainder of these Terms and Conditions of Use shall continue in full force and effect. These Terms and Conditions of Use shall be governed by and construed in accordance with the laws of Italy.

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio