Company

Service

Resources

Basics

F.A.Q.

Support

Careers

Press Review

Optics

Lighting

Cameras

Software

Accessories

AI Vision Units

TC2MHR120-C

High resolution telecentric lens for 1″ detectors, magnification 0.104x, C-mount

Prev Next

Specifications

Magnification	(x)	0.104
Image circle Ø	(mm)	16.5
Object field of view 8	(mm x mm or Ø)
with IMX174/IMX249 13.3 mm diag w x h 11.35 x 7.13		109.09 x 68.52
with IMX255/IMX267 16.1 mm diag w x h 14.19 x 7.51		136.44 x 72.21
with IMX253/IMX304 17.6 mm diag w x h 14.16 x 10.37		Ø = 99.72
with KAI-4022/4021 21.5 mm diagonal w x h 15.2 x 15.2		Ø = 145.72
with KAI-08050 22.6 mm diagonal w x h 18.1 x 13.6 (7)		Ø = 130.73
Optical specifications
Working distance (1)	(mm)	334.6
wF/# (2)		16
Telecentricity typical (max) (3)	(deg)	<0.07(0.10)
Distortion typical (max) (4)	(%)	<0.07 (0.10)
Field depth (5)	(mm)	110.9
CTF@ 50 lp/mm	(%)	> 40
Mechanical specifications
Mount		C
Phase adjustment(9)		Yes
Length (6)	(mm)	451.4
Diameter	(mm)	180
Mass	(g)	4760

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F-number (wF/#): the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5 μm.
Measured from the front end of the mechanics to the camera flange.
With KAI-08050 (22.6 mm diagonal) detectors, the FOV of TC4MHRyyy-x lenses may show some vignetting at the image corners.
For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the detector.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State/Zone/Department

Your message

* After submit we'll ask you to check your consense to use Your data

E-mail

Please, insert a valid E-mail and accept conditions.

: With this you authorize the treatment of your personal data and give us a consense to contact you in order to work on your commercial requests and to be able to send you our best offers to cover your needs. For more details, please, read here(MANDATORY)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you email newsletters about products, sales, events, company announcements and to be able to send you our best offers to cover your needs. Newsletter are sent (roughly) twice a month. We will NOT spam or abuse your email in any way. For more details, please, read here(OPTIONAL)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you our product catalog by traditional mail (every two years). For more details, please, read here(OPTIONAL)

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

LTCLHP series

High-performance telecentric illuminators

+ click to view all

LTCLHP120‑R	Telecentric HP illuminator, beam diameter 150 mm, red
LTCLHP120‑G	Telecentric HP illuminator, beam diameter 150 mm, green
LTCLHP120‑W	Telecentric HP illuminator, beam diameter 150 mm, white

LTCLHP CORE series

Ultra compact telecentric illuminators

+ click to view all

LTCLCR120‑R	Telecentric CORE illuminator, beam dimensions Ø = 156, x = 130, red, 630 nm
LTCLCR120‑G	Telecentric CORE illuminator, beam dimensions Ø = 156, x = 130, green, 520 nm
LTCLCR120‑W	Telecentric CORE illuminator, beam dimensions Ø = 156, x = 130, white

LTRNST series

LED ring illuminators - straight type

+ click to view all

LTRN120RD	Ring LED illuminator, inner diameter 180 mm, straight type, red 630 nm
LTRN120GR	Ring LED illuminator, inner diameter 180 mm, straight type, green 525 nm
LTRN120BL	Ring LED illuminator, inner diameter 180 mm, straight type, blue 470 nm
LTRN120NW	Ring LED illuminator, inner diameter 180 mm, straight type, white

LTBC series

Continuos LED backlight

+ click to view all

LTBC174174‑W	Continuos LED backlight, 174x174 illumination area, white
LTBC174174‑G	Continuos LED backlight, 174x174 illumination area, green

LTBRDC series

Continuous LED bar lights

+ click to view all

LTZPFL200‑00‑6‑W‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, white, 24V
LTZPFL200‑00‑6‑R‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, red, 24V
LTZPFL200‑00‑6‑G‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, green, 24V
LTZPFL200‑00‑6‑B‑24V	LED bar light, 6 LED rows, 200X26.3 illumination area, blue, 24V

CMHO series

Clamping mechanics

+ click to view all

CMHO120

Clamping mechanics for TCxx110, TCxx120 lenses and LTCLHP120-X illuminators

Accessories

Accessories and add-ons to make the most of Opto Engineering lenses.

+ click to view all

TCFILTER

Filter mount for telecentric lenses

mvBlueFOX3-2 series

USB3 vision camera with Sony Pregius CMOS sensors

+ click to view all

RT‑mvBF3‑2024a	USB3 Vision camera with Sony Pregius CMOS sensor IMX249
RT‑mvBF3‑2024	USB3 Vision camera with Sony Pregius CMOS sensor IMX174
RT‑mvBF3‑2089a	USB3 Vision camera with Sony Pregius CMOS sensor IMX267
RT‑mvBF3‑2089	USB3 Vision camera with Sony Pregius CMOS sensor IMX255

mvBlueCOUGAR series

GigE & Dual GigE Vision cameras

+ click to view all



RT‑mvBC‑X104f	Camera with interface GigE (1GB/s), sensor size 1/1.2", mpixel 2.35, resolution 1936 x 1216, sensor name IMX249, sensor type CMOS
RT‑mvBC‑XD104d	Camera with interface Dual GigE (2GB/s), sensor size 1/1.2", mpixel 2.35, resolution 1936 x 1214, sensor name IMX174, sensor type CMOS
RT‑mvBC‑X109b	Camera with interface GigE (1GB/s), sensor size 1", mpixel 8.95, resolution 4112 x 2176, sensor name IMX267, sensor type CMOS
RT‑mvBC‑XD109b	Camera with interface Dual GigE (2GB/s), sensor size 1", mpixel 8.95, resolution 4112 X 2176, sensor name IMX267, sensor type CMOS

COE HR AS-X series

20MP, 26MP and 29MP area scan cameras for high-speed applications

+ click to view all

COE‑200‑M‑POE‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Gray, GigE, 6 fps, POE, C - mount, Glass filter
COE‑200‑C‑POE‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Color, GigE, 6 fps, POE, C - mount, Infrared cut filter
COE‑200‑M‑USB‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Gray, 14 fps, C - mount, Glass filter
COE‑200‑C‑USB‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Color, 14 fps, C - mount, Infrared cut filter

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio