AI Vision Units
Most LED manufacturers suggest their products to be driven using a constant current source, not a constant voltage source.
This is because, using a constant voltage driving, small variations in temperature or voltage at the LEDs can cause a noticeable change in their brightness.
Brightness control with voltage is also very difficult because of the non-linearity of brightness with voltage.
On the contrary, the brightness is approximately linear with current, so by driving the LEDs with a known current, intensity control is linear.
This strobe controller has a single, programmable, constant-current pulsed output with current ranging from 5mA to 17.0A over three current ranges:
There is a galvanically isolated synchronization input. This input can be connected directly to the system for voltages up to 24V DC. An external resistor is not necessary.
There is a galvanically isolated synchronization output. This output can be used, for example, to trigger a camera or a slave lighting controller.
This controller features an internal digital logic to filter the synchronization input signal and to generate the synchronization output signal. An output protection circuit, used to prevent the lighting from getting overheated and thus damaged, is also included in this logic.
The controller is supplied from a single 24V DC power source.
The controller has an internal, user activatable, 24V to 48V DC step-up converter. This widens the range of lighting systems the controller can drive.
The controller can be quickly configured using a 12-way dip switch accessible from the top panel.
The controller is housed in a small, compact unit with DIN rail mounting.
For in-depth documentation please refer to the product manual.
LTDV1CH is simply configured from the front panel via DIP switches. You can easily set the intensity of the LED lights driving current (from 5mA to 17A), filtering option for the trigger signal (select between 10 μs or 100 μs time constant) and delay for synchronization output (select between 0 or 100 μs).
Last update: 2019-07-02
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
DIP switches interface for simple and fast configuration
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
Outstanding optical performance. Unmatched customer service.
132mm working distance coaxial telecentric lenses for sensors up to 2/3”
Coaxial telecentric assemblies for sensors up to 2/3”
High uniformity continuous LED backlights
Advanced lighting solutions.
High power strobed LED backlights
The Telecentric Company
Optical Imaging Technologies for Machine Vision
LTDMC series (discontinued models)
Continuous LED domes
LTCLHP CORE series
Compact telecentric illuminators
LTLAIC series (discontinued models)
Continuous LED low angle diffused ring lights
Flat telecentric illuminators for line scan cameras
LED ring illuminators - straight type
Continuous LED direct ring lights
High power strobed LED low angle diffused ring lights
Continuous LED low angle direct ring lights
LED ring illuminators - oblique type
High power LED ring illuminators - oblique type
LTTNC series (discontinued models)
Continuous LED tunnel lights
High power strobed LED domes
Continuous LED bar lights
Continuous LED coaxial lights
High power enhanced LED line lights
LED Pattern projectors
Advanced structured lighting.
3W tilting LED pattern projectors
LED patterns projectors