Optics

Lighting

Cameras

Software

Accessories

AI Vision Units

Resources

LTDV1CH-17

Strobe controller 1 channel 17 A

Download datasheet

Synchronization input

There is a galvanically isolated synchronization input. This input can be connected directly to the system for voltages up to 24V DC. An external resistor is not necessary.

Synchronization output

There is a galvanically isolated synchronization output. This output can be used, for example, to trigger a camera or a slave lighting controller.

Internal logic

This controller features an internal digital logic to filter the synchronization input signal and to generate the synchronization output signal. An output protection circuit, used to prevent the lighting from getting overheated and thus damaged, is also included in this logic.

Single 24V to 48V DC supply

The controller can be supplied from a single 24V to 48V DC power source.

Configuration

The controller can be quickly configured using a 4-way dip switch accessible from the top panel.

Easy installation

The controller is housed in a small, compact unit with DIN rail mounting.

For in-depth documentation please refer to the product manual.

Specifications

Electrical specifications
User interface		4-way dip switch
Configuration software		-
Output channels		1 constant current output
Output current range 2	(A)	17.0 (fixed)
Max dissipable thermal power per channel	(W)	8
Synchronization inputs n°		1 opto-isolated digital input
Synchronization outputs n°		1 opto-isolated digital output
Pulse delay	(μs)	-
Pulse width	(μs)	-
Timing repeatability for pulse delay	(μs)	-
Timing repeatability for pulse width	(μs)	-
Supply voltage	(V, DC)	24 - 48
Output voltage	(V)	0 - 12 (with 24V supply) or 0 - 36 (with 48V supply)
Max startup/inrush current	(A)	2.5
Mechanical specifications 6
Length	(mm)	70
Width	(mm)	119
Height	(mm)	82
Mounting		DIN rail
Compatibility
Accessories		-
Compatible products		LTDMB2-W, LTDMB2-G, LTDMB2-R, LTDMC2-W, LTDMC2-G, LTDMC2-R, LTLAB2-W, LTLAB2-G, LTLAB2-R, LTLAC2-W, LTLAC2-G, LTLAC2-R, LTDMLAB2-WW, LTDMLAC2-WW 8
Environment
Operating temperature	(deg)	0-40
Storage temperature	(deg)	0-50
Humidity		20% to 85% relative humidity, non condensing
IP rating		20
Installation		Indoor use only

Notes

With Modbus RTU slave protocol.
In steps of 98 mA.
Opto isolated. Operate from 3.3V to 24V.
In steps of 1 μs.
Regulated ± 10%.
Including DIN fixing.
To be ordered separately. ADPT001 consists of - one RS485-USB adapter and - one cable with 3.3 elements for connection with LTDV6CH. In order to configure LTDV6CH via software ADPT001 must be used.
LTDMLA series require two LTDV1CH strobe controllers to power and control both the two integrated illumination units (dome + ring light).
Continuous mode option is also available for the low current range.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Key benefits and features

Single, fixed, constant-current pulsed output. Nominal currents are as follows:
- 7.5A for the LTDV1CH-7 model
- 17.0A for the LTDV1CH-17 model
1 galvanically isolated synchronization input
1 galvanically isolated synchronization output
Internal logic for filtering of synchronization input and generation of synchronization output
Easy installation
Small, compact unit with DIN rail mounting

Layout files

PDF DXF IGS STEP

Buy this product

Please enter the desired quantity to calculate price and delivery time. For high-volume orders, please contact us.

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State (US)

Your message

Copy the Opto Security Number below
(4 characters)

* After submit we'll ask you to check your consense to use Your data

Compatible products

LTDMB2‑R	Diffusive strobed dome illuminator - medium size high power red
LTDMB2‑G	Diffusive strobed dome illuminator - medium size high power green
LTDMB2‑W	Diffusive strobed dome illuminator - medium size high power white
LTDMC2‑R	Diffusive strobed dome illuminator - large size high power red
LTDMC2‑G	Diffusive strobed dome illuminator - large size high power green
LTDMC2‑W	Diffusive strobed dome illuminator - large size high power white

LTLAB2‑R	Diffusive strobed low angle ring light illuminator - medium size high power red
LTLAB2‑G	Diffusive strobed low angle ring light illuminator - medium size high power green
LTLAB2‑W	Diffusive strobed low angle ring light illuminator - medium size high power white
LTLAC2‑R	Diffusive strobed low angle ring light illuminator - large size high power red
LTLAC2‑G	Diffusive strobed low angle ring light illuminator - large size high power green
LTLAC2‑W	Diffusive strobed low angle ring light illuminator - large size high power white

LTDMLAB2‑WW	Diffusive strobed dome + low angle illumination system - medium size high power white
LTDMLAC2‑WW	Diffusive strobed dome + low angle illumination system - large size high power white

RT‑SDR‑240‑48

48DC DIN rail power supply

LTPRUP series

90W strobed LED pattern projectors

Sitemap

TERMS AND CONDITIONS OF USE

All materials on this website www.opto-engineering.com (and all other possible local domains of Opto Engineering), including but not limited to: audio, images, software, text, video clips, design, structure, selection, coordination, expression (next - the "Content"), contained on this website are protected by copyright under Italian copyright law, international conventions and other copyright laws.

Any copying, posting, reproduction, public displaying, modification, translation, distribution or other unauthorized use of the Content (including any portion or version thereof) is prohibited. Nevertheless, users of this website have the limited permission to view, print and distribute the Contents for personal informational purposes so long as any copy or other reproduction includes the above copyright notice. All other actions should be previously authorized in written by Opto Engineering.

You agree to follow all instructions on this website limiting the way you may use the Content.

The products, processes, technology and related information described in this website may be covered by one or more issued/pending Opto Engineering patents. No license or other intellectual property right are granted or conferred by this website or by anything appearing herein to such Opto Engineering products, processes or technologies.

On this website there are also represented the proprietary logos, service marks and trademarks. By making them available on this website, Opto Engineering is not granting any license to utilize those proprietary logos, service marks, or trademarks. Any unauthorized use of the Content may violate copyright laws, trademark laws, the laws of privacy and other laws connected.

If you send any communications or materials to the website by electronic mail or otherwise, including any comments, data, questions, suggestions, or the like, all such communications are, and will be treated as, non-confidential and non-proprietary. In consequence, you give up any claim that any use of such material violates any of your rights including moral rights, privacy rights, proprietary or other property rights, publicity rights, rights to credit for material or ideas, or any other right, including the right to approve the way Opto Engineering uses such material.

This website may contain links to other Internet websites on the World Wide Web. Opto Engineering provides such links for your convenience only, and is not responsible for the content of any website linked to or from this website. Links from this website to any other website do not mean that Opto Engineering approves of, endorses, or recommends that website. Opto Engineering disclaims all warranties, express or implied, as to the accuracy, legality, reliability, or validity of any content on any other website.

The product and/or service information set forth in this website may contain errors and omissions, may be outdated. No statement, representation or other information contained in this website should be construed as binding upon Opto Engineering contractually or otherwise the basis for any express or implied warranty. Please contact Opto Engineering for the most up-to-date information regarding specific products and services. Opto Engineering may also add, change, discontinue, remove, or suspend any other Content posted on this website, including features and specifications of products described or depicted on the website, temporarily or permanently, at any time, without notice and without liability.

Opto Engineering may add to, change, or remove any part of these Terms and Conditions of Use at any time, without notice. Any changes to these Terms and Conditions of Use or any terms posted on this website apply as soon as they are posted. By continuing to use this website after any changes are posted, you are indicating your acceptance of those changes.

These Terms and Conditions of Use and any additional terms posted on this website together constitute the entire agreement between Opto Engineering and you with respect to your use of this website. If for any reason a court of competent jurisdiction finds any provision of these Terms and Conditions of Use, or portion thereof, to be unenforceable, that provision shall be enforced to the maximum extent permissible so as to effect the intent of this agreement, and the remainder of these Terms and Conditions of Use shall continue in full force and effect. These Terms and Conditions of Use shall be governed by and construed in accordance with the laws of Italy.

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio