Optical specifications
Modules		5x5
Number of LEDs		1200
Light color, peak wavelength		green, 525 nm
Spectral FWHM	(nm)	30
Width	(mm)	240
Height	(mm)	180
Diffusertd>		yes
Collimation film		no
Minimum estimated illumination 1	(klux)	n.a.
Electrical specifications
Power mode supply		strobe only, constant current driving
Max driving current 2	(A)	10,5 + 10,5
Pulse width 3	(ms)	≤ 1
Typical voltage	(V)	28.8
Peak power consumption	W	605
Connection type 4		M12
MTBF 5	(hours)	> 50000
Pin 1		LED +
Pin 2		LED +
Pin 3		LED -
Pin 4		LED -
Max current alignment mode 6	(mA)	62 + 62
Mechanical specifications
Width	(mm)	252
Height	(mm)	200
Thickness	(mm)	26
Mass	(g)	1736
Material	Black&Blue anodized aluminum body
Clamping system	8x M6 theaded holes
Environment
Operating temperature	(°C)	0-40
Storage temperature	(°C)	0-50
Humidity		20-85% non condensing
IP rating		IP40
Installation		indoor use only
Eye safety
Risk group according to CEI EN 62471:2010		Exempt

Last update: 2021-06-11

Notes

At max driving current, on emitting surface. Where n.a. is reported data is available upon request.
Models where two currents are listed (such as LTBP240180-R) feature two separate channels
At 25°C. At max pulse width (1 ms), max pulse frequency = 15 Hz.
5 m cable with straight female connector included. Optional cable with right angled connector is also available and must be ordered separately (refer to our website for further info and ordering codes).
At 25°C. Estimated
LTBP series can be used in continuous "alignment" mode: a small continuous current can be supplied to align the backlight with the camera/lens. Models where two currents are listed (such as LTBP240180-R) feature two separate channels.

Connection

Illuminator side - male pins
Front view

- thread: M12, industrial
- description: receptacle, straight
- plug-in contact type: male
- number of contacts: 4

Cable side
(front view)

Pin: Cable color

LED1+: Brown
White
LED1-: Green
Yellow
LED2+: Blue
Red
LED2-: Grey
Pink

Do not remove parallelization

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Dimensions schema (click image to enlarge view)

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

TC3MHR-TC5MHR CORE PLUS series

Compact large-FOV telecentric lenses for sensors up to 4/3”

+ View all products

TCCP5MHR144‑F	Ultra compact bi-telecentric lens for matrix detectors up to 4/3”, magnification 0.117x
TCCP5MHR192‑F	Ultra compact bi-telecentric lens for matrix detectors up to 4/3”, magnification 0.088x

TC CORE PLUS series

Compact large-FOV bi-telecentric lenses for sensors up to 2/3”

+ View all products

TCCP12192	Ultra compact bi-telecentric lens for matrix detectors up to 1/1.8”, magnification 0.033x
TCCP23192	Ultra compact bi-telecentric lens for matrix detectors up to 2/3”, magnification 0.046x

LTDV series

LED lighting strobe controllers

+ View all products

LTDV1CH‑17V	Strobe controller 1 channel variable current 5 mA - 17A
LTDVE2CH‑20F	LED Strobe controller 2 channels, 20A/40A pulsed - 2A/4A continuous, fast version
LTDVE4CH‑20	LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LTDVE8CH‑20	LED Strobe controller 8 channels, 20A pulsed - 2A continuous

CB series

Cables

+ View all products

CBLT003	Illumination cable PVC black, side 1 M8 connector straight, side 2 cable end - 5 m - for single stage systems
CBLT004	Illumination cable PVC black, side 1 M8 connector right angled, side 2 cable end - 5 m - for single stage systems
CBLT005	Illumination cable PVC grey, side 1 M12 connector straight, side 2 cable end - 5 m - for double stage systems
CBLT006	Illumination cable PVC grey, side 1 M12 connector right angled, side 2 cable end - 5 m - for double stage systems

Company & Resources

Optical imaging technologies OE for the future Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT