Optical specifications
Modules		4x4
Number of LEDs		768
Light color, peak wavelength		Cool white, > 4500 K
Spectral FWHM	(nm)	Cool white, > 4500 K
Lighting area dimension
Width	(mm)	192
Height	(mm)	144
Illuminance 1	(klux)	16
Power per unit area 1	(W/m²)	-
Diffuser		yes
Collimation film 6		no
Electrical specifications
Continuous mode
Supply voltage	(V)	24
Current 4	(mA)	1220
Power consumption 5	W	29.3
Pulsed mode
Max pulse current 2	(mA)	2550
Typical voltage	(V)	35.3
Connection type 3		M8
Pin 1		LED +
Pin 2		LED +
Pin 3		LED -
Pin 4		LED -
Mechanical specifications
Width	(mm)	204
Height	(mm)	164
Thickness	(mm)	26
Mass	(g)	1281
Material	Black&Blue anodized Aluminum
Clamping system	8x M6 threaded holes
Environment
Operating temperature	(°C)	0-40
Storage temperature	(°C)	{storage_temp}
Humidity		20-85% non condensing
IP rating		IP40
Installation		indoor use only
Eye safety
Risk group according to CEI EN 62471:2010		Exempt

Last update: 2021-07-01

Notes

Maximum current +/- 10%
Maximum power +/- 10%
5 m cable with straight female connector included. Optional cable with right angled connector is also available and must be ordered separately (refer to our website for further info and ordering codes).

Ordering information

Our part numbers are coded as LT2BC xxx yyy - z - a, where:
- xxx defines the illumination area length (in mm),
- yyy defines the illumination area width (in mm),
- z defines the color. R = red, G = green, B = blue, W = white, IR860 = Infrared 860 nm,
- a defines the presence of an optional optical sheet. CO = with collimation films in both horizontal and vertical directions. Leave empty if no optional optical sheet is required. For additional options such as horizontal/vertical linear or circular polarizers, contact us.

Connection

Cable side
(front view)

- thread: M8, industrial
- description: receptacle, straight
- plug-in contact type: male
- number of contacts: 4

Cable side
(front view)

- cable: CBLT003
- description: receptacle, straight
- plug-in contact type: female
- number of contacts: 4

: PIN; description
LED +: 1; positive terminal
LED +: 2; positive terminal
LED -: 3; negative terminal
LED -: 4; negative terminal

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

TC3MHR-TC5MHR CORE PLUS series

Compact large-FOV telecentric lenses for sensors up to 4/3”

+ View all products

TCCP3MHR144‑C	Ultra compact bi-telecentric lens for matrix detectors up to 1.1”, magnification 0.086x
TCCP5MHR144‑F	Ultra compact bi-telecentric lens for matrix detectors up to 4/3”, magnification 0.117x

TC CORE PLUS series

Compact large-FOV bi-telecentric lenses for sensors up to 2/3”

+ View all products

TCCP12144	Ultra compact bi-telecentric lens for matrix detectors up to 1/1.8”, magnification 0.044x
TCCP23144	Ultra compact bi-telecentric lens for matrix detectors up to 2/3”, magnification 0.059x

LTDV series

LED lighting strobe controllers

+ View all products

LTDV1CH‑17V	Strobe controller 1 channel variable current 5 mA - 17A
LTDVE2CH‑20F	LED Strobe controller 2 channels, 20A/40A pulsed - 2A/4A continuous, fast version
LTDVE4CH‑20	LED Strobe controller 4 channels, 20A pulsed - 2A continuous
LTDVE8CH‑20	LED Strobe controller 8 channels, 20A pulsed - 2A continuous

CB series

Cables

+ View all products

CBLT003	Illumination cable PVC black, side 1 M8 connector straight, side 2 cable end - 5 m - for single stage systems
CBLT004	Illumination cable PVC black, side 1 M8 connector right angled, side 2 cable end - 5 m - for single stage systems

LTIC series

LED lighting controllers

+ View all products

LTIC1CH‑A1‑4	Analogue lighting controller unit, 4A, 24V
LTIC1CH‑D1‑4	Digital lighting controller unit, 4A, 24V
LTICGR1000‑D1	Analogue lighting controller unit, 1 channel, 24V, 2A, constant mode, power adaptor 24V plug

Company & Resources

Optical imaging technologies OE for the future Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Product awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® → SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT