MCSM Macro setup
Setting-up the Scheimpflug mount is easy. First screw the lens into the camera C-mount, just like with any common lens. Loosen the lens C-mount adaptor by unscrewing the set-screws. Tune the lens phase to the right position, then tighten the set-screws.
Mount the lens to a secure fixture by means of the threaded holes. Once the lens is mounted, adjust the focus until the image at the centre of the detector is sharp; you don’t need to tilt the detector yet.
With the lens mounted and well focused, adjust the tilt control on the side of the Scheimpflug mount by means of a screwdriver. It might be required to perform a second fine focusing of the lens to achieve the perfect setting. Once the Scheimpflug angle is set, lock the mount in place by tightening the lateral set-screws.
