TC12M048-F

High resolution telecentric lenses, magnification 0.576, WD 92.6

Download datasheet

Specifications

Magnification	(x)	0.576
Image circle Ø	(mm)	33.5
Object field of view
with PYTHON 26.07 mm diagonal w x h 18.43 x 18.43	(mm x mm)	32.00 x 32.00
with APS-C CMV12000 28.16 mm diagonal w x h 22.53 x 16.90	(mm x mm)	39.11 x 39.11
with line - 4k detector 4k x 7 µm 28.67	(mm)	49.77
with APS-H PYTHON 32.58 mm diagonal w x h 23.4 x 23.4	(mm x mm)	40.00 x 40.00
with APS-H KAI-16050 32.4 mm diagonal w x h 26.93 x 17.95	(mm x mm)	46.75 x 31.17
Optical specifications
Working distance (1)	(mm)	92.6
wF/# (2)		10
Telecentricity typical (max) (3)	(deg)	<0.08 (0.10)
Distortion typical (max) (4)	(%)	<0.08 (0.10)
Field depth (5)	(mm)	2.5
CTF@ 50 lp/mm	(%)	> 55
Mechanical specifications
Mount (6)		F
Phase adjustment		Yes
Length (7)	(mm)	268.8
Diameter	(mm)	75
Mass	(g)	925

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F/#: the real F/# of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5.5 μm.
FD stands for Flange Distance (in mm), defined as the distance from the mounting flange (the “metal ring” in rear part of the lens) to the camera detector plane.
Measured from the front end of the mechanics to the camera flange.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

PDF DXF IGS STEP

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State (US)

Your message

Copy the Opto Security Number below

* After submit we'll ask you to check your consense to use Your data

E-mail

Please, insert a valid E-mail and accept conditions.

: With this you authorize the treatment of your personal data and give us a consense to contact you in order to work on your commercial requests and to be able to send you our best offers to cover your needs. For more details, please, read here(MANDATORY)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you email newsletters about products, sales, events, company announcements and to be able to send you our best offers to cover your needs. Newsletter are sent (roughly) twice a month. We will NOT spam or abuse your email in any way. For more details, please, read here(OPTIONAL)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you our product catalog by traditional mail (every two years). For more details, please, read here(OPTIONAL)

Design & development by Opto Engineering → SEO and consulting by Dipiemme Studio