Specifications
Downloads
Compatible products
| Main optical specifications | ||
| Magnification | (x) | 0.138 |
| Image circle diameter | (mm) | 11.0 |
| Max sensor size | 2/3″ | |
| Object field of view | ||
| 1/3” | (mm × mm) | 34.78 x 26.09 |
| 1/2.5” | (mm × mm) | 41.30 x 31.01 |
| 1/2” | (mm × mm) | 46.38 x 34.78 |
| 1/1.8” | (mm × mm) | 51.67 x 38.62 |
| 2/3” | (mm × mm) | 61.59 x 51.38 |
| Advanced optical specifications | ||
| Working distance (1) | (mm) | 64.4 |
| Working ƒ/N (2) | 8 | |
| Telecentricity typical (max) (3) | (deg) | < 0.05 (0.08) |
| Distortion typical (max) (4) | (%) | < 0.03 (0.07) |
| Depth of field (5) | (mm) | 21.70 |
| Resolution (6) | (μm) | 37 |
| Lighting specifications | ||
| Light color, peak wavelength | white, 6000 K | |
| Spectral FWHM | (nm) | - |
| Electrical specifications | ||
| Supply voltage | (V) | 12-24 |
| Max power consumption | (W) | 2.5 |
| LED voltage (7) | (V) | 2.8 (-) |
| LED current (8) | (mA) | 350 |
| Max pulse current (9) | (mA) | 2000 |
| Connector | M8 | |
| Cables | CB244P1500 included | |
| Mechanical specifications | ||
| Mount | C | |
| Phase adjustment | No | |
| Length (10) | (mm) | 363.7 |
| Width | (mm) | 128.0 |
| Height | (mm) | 349.9 |
| Mass | (g) | 3891 |
| Environmental specifications | ||
| Operating temperature | (°C) | 0-40 |
| Storage temperature | (°C) | 0-50 |
| Operating relative humidity | (%) | 20-85, non condensing |
| Installation | Indoor use only | |
| Eye safety | ||
| Risk group according to CEI EN 62471:2010 | Risk group 2 | |
Last update 29 May 2023
Notes
- Working distance: distance between the beam splitter's front mechanics and the object. Set this distance within ± 3% of the nominal value for maximum resolution and minimum distortion.
- Working f-number (wf/N): the real f-number of a lens in operating conditions.
- Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed.
- Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed.
- At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm.
- Object side, calculated with the Rayleigh criterion with λ= 520 nm
- At max forward current. Tolerance is ± 0.06V on forward voltage measurements.
- Used in continuous (not pulsed) mode.
- At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info).
- Measured from the beam splitter's front mechanics to the camera flange.
All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.
Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.
COE-032-M-POE-040-IR-C
Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 μm, 1/1.8", Mono, 37.5 fps, 1 GigE, POE, C-mount, AR filter
COE-032-C-POE-040-IR-C
Area scan camera IMX265, CMOS, Global shutter, 2048 x 1536, 3.1 MP, 3.45 μm, 1/1.8", Color, 12.5 fps, 1 GigE, POE, C-mount, IR cut filter
RT-mvBC-X104iG
Camera with interface 1 GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX265, sensor type CMOS
RT-mvBC-XD104hG
Camera with interface Dual GigE, sensor size 1/1.8", 3.2 MP, resolution 2064 x 1544, sensor name IMX252, sensor type CMOS
RT-mvBC-XD105aG
Camera with interface Dual GigE, sensor size 2/3", 5.1 MP, resolution 2464 x 2056, sensor name IMX250, sensor type CMOS
CMHO064
Clamping mechanics for TCxx064 lenses and LTCLHP064-X illuminators
LTSCHP1W-W
Replacement LED module, white
LTDV1CH-17V
Strobe controller 1 channel variable current 5 mA - 17A
LTICOBUL1000CH1-24VUKTB
24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
LTICOBUL1000CH1-24VUSTB
24VDC analog lighting controller 1 channel, UK power cord, Illumination cable, side A SM 3 way male connector, side B terminal blocks connector, 24V - 3m
RT-SDR-120-24
DIN rail power supply
Request a quote
Add this product to the quote request list.
Product images
