Liquid level inspection
See also
ITALA® cameras for quality control of metal turned components
AML designed a vision system featuring a rotary glass table where cylindrical metal components are measured and inspected at the maximum speed of 30.000 pieces per hour. The parts feature diameter and height dimensions between 3 mm and 50 mm.
ITALA® cameras for quality control of courtesy light projector modules
The automotive industry is arguably the most traditionally associated with machine vision, with a wide range of possible applications. Today, electronics has penetrated virtually every field, and automotive is no exception: in this application case, ITALA® cameras from Opto Engineering® are used for quality control of courtesy light projector modules.
ITALA G cameras for high-speed check of injector nozzles
Injector nozzles are widely used in the automotive industry and are subjects to different types of inspection, as they undergo both measurement and surface checks. In addition, data matrix reading is often performed for traceability purposes. For these reasons, a double type of inspection with a different set of hardware is usually required: a backlight configuration for measurement and a front-light configuration for surface inspection and data matrix reading.
ITALA® cameras for high performance fasteners sorting machines
DGSORT is a 100% belt sorting system designed to inspect the size and shape of objects including screws, pins and bolts up to 120 mm in length. The system has sub-centesimal precision and reaches rates of up to 700 pieces per minute.
ITALA G.EL for all-round inspection of vial caps
In the pharmaceutical industry, a full inspection of vial caps is always necessary to perform OCR or data matrix reading for traceability purposes. When large samples or different sizes are involved, multi-camera systems are the preferred solution, but they are complex and bulky.
Opto Engineering offers an innovative solution to overcome these limitations and get the best out of your vision system.