Bottle dimensional check
The coupling of a compact telecentric lens with a high-uniformity backlight illuminator generates a highly contrasted silhouette of large bottles. The images are then processed with a dedicated metrology software.
See also
ITALA G cameras for high-speed check of injector nozzles
Injector nozzles are widely used in the automotive industry and are subjects to different types of inspection, as they undergo both measurement and surface checks. In addition, data matrix reading is often performed for traceability purposes. For these reasons, a double type of inspection with a different set of hardware is usually required: a backlight configuration for measurement and a front-light configuration for surface inspection and data matrix reading.
ITALA G.EL for all-round inspection of vial caps
In the pharmaceutical industry, a full inspection of vial caps is always necessary to perform OCR or data matrix reading for traceability purposes. When large samples or different sizes are involved, multi-camera systems are the preferred solution, but they are complex and bulky.
Opto Engineering offers an innovative solution to overcome these limitations and get the best out of your vision system.
Telecentric lenses for the inspection of microplates
Telecentric lenses for the inspection of stators in electric engines
360° label inspection on pharmaceutical bottles
The customer was asked by a pharmaceutical company to develop an inline vision system to verify labels on small plastic bottles at a rate of 60 ppm. The inspection required performing OCR to read the reference code, control or lot number on the label for Track and Trace purposes. Moreover, they had to verify that the label was applied correctly on the bottle: specifically the “double-label” issue was checked, that is when two labels were incorrectly applied to the bottle.