Company

Service

Resources

Basics

F.A.Q.

Support

Careers

Press Review

Optics

Lighting

Cameras

Software

Accessories

AI Vision Units

TC4MHR080-C

High resolution telecentric lens for 1.2″ detectors, magnification 0.221x, C-mount

Prev Next

Specifications

Magnification	(x)	0.221
Image circle Ø	(mm)	21.7
Object field of view 8	(mm x mm or Ø)
with IMX174/IMX249 13.3 mm diag w x h 11.35 x 7.13		51.33 x 32.24
with IMX255/IMX267 16.1 mm diag w x h 14.19 x 7.51		64.21 x 33.98
with IMX253/IMX304 17.6 mm diag w x h 14.16 x 10.37		64.07 x 46.93
with KAI-4022/4021 21.5 mm diagonal w x h 15.2 x 15.2		68.9 x 68.9
with KAI-08050 22.6 mm diagonal w x h 18.1 x 13.6 (7)		82.0 x 61.7
Optical specifications
Working distance (1)	(mm)	226.8
wF/# (2)		16
Telecentricity typical (max) (3)	(deg)	<0.05 (0.10)
Distortion typical (max) (4)	(%)	<0.04 (0.10)
Field depth (5)	(mm)	24.6
CTF@ 50 lp/mm	(%)	> 40
Mechanical specifications
Mount		C
Phase adjustment(9)		Yes
Length (6)	(mm)	347.6
Diameter	(mm)	116
Mass	(g)	1582

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F-number (wF/#): the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5 μm.
Measured from the front end of the mechanics to the camera flange.
With KAI-08050 (22.6 mm diagonal) detectors, the FOV of TC4MHRyyy-x lenses may show some vignetting at the image corners.
For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the detector.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Buy this product

Please enter the desired quantity to calculate price and delivery time. For high-volume orders, please contact us.

Request a quote

Simply fill in the form below to receive a quote or to request further info about this product: a sales engineer will get back to you within 24 hours.

* Please note: all fields are required.

First name

Last name

Job description

Company

Address

City

ZIP code

Phone

Country

State/Zone/Department

Your message

* After submit we'll ask you to check your consense to use Your data

E-mail

Please, insert a valid E-mail and accept conditions.

: With this you authorize the treatment of your personal data and give us a consense to contact you in order to work on your commercial requests and to be able to send you our best offers to cover your needs. For more details, please, read here(MANDATORY)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you email newsletters about products, sales, events, company announcements and to be able to send you our best offers to cover your needs. Newsletter are sent (roughly) twice a month. We will NOT spam or abuse your email in any way. For more details, please, read here(OPTIONAL)
: With this you authorize the treatment of your personal data and give us a consense to contact you and send you our product catalog by traditional mail (every two years). For more details, please, read here(OPTIONAL)

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

LTCLHP series

High-performance telecentric illuminators

+ click to view all

LTCLHP080‑R	Telecentric HP illuminator, beam diameter 100 mm, red
LTCLHP080‑G	Telecentric HP illuminator, beam diameter 100 mm, green
LTCLHP080‑B	Telecentric HP illuminator, beam diameter 100 mm, blue
LTCLHP080‑W	Telecentric HP illuminator, beam diameter 100 mm, white

LTCLHP CORE series

Ultra compact telecentric illuminators

+ click to view all

LTCLCR080‑R	Telecentric CORE illuminator, beam dimensions Ø = 98; x = 90, red
LTCLCR080‑G	Telecentric CORE illuminator, beam dimensions Ø = 98; x = 90, green
LTCLCR080‑W	Telecentric CORE illuminator, beam dimensions Ø = 98; x = 90, white

LTLADC series

Continuous LED low angle direct ringlights

+ click to view all

LTZZO170‑75‑3‑W24V	LED low angle ringlight, 3 LED rows, outer diameter 175 mm, 75°, white, 24V
LTZZO170‑75‑3‑R‑24V	LED low angle ringlight, 3 LED rows, outer diameter 175 mm, 75°, red, 24V
LTZZO170‑75‑3‑G‑24V	LED low angle ringlight, 3 LED rows, outer diameter 175 mm, 75°, green, 24V
LTZZO170‑75‑3‑B‑24V	LED low angle ringlight, 3 LED rows, outer diameter 175 mm, 75°, blue, 24V

LTRNST series

LED ring illuminators - straight type

+ click to view all

LTRN080RD	Ring LED illuminator, inner diameter 116 mm, straight type, red 630 nm
LTRN080GR	Ring LED illuminator, inner diameter 116 mm, straight type, green 525 nm
LTRN080BL	Ring LED illuminator, inner diameter 116 mm, straight type, blue 470 nm
LTRN080NW	Ring LED illuminator, inner diameter 116 mm, straight type, white

LTBC series

Continuos LED backlight

+ click to view all

LTBC114114‑W	Continuos LED backlight, 114x114 illumination area, white
LTBC114114‑G	Continuos LED backlight, 114x114 illumination area, green

LTBFC series

Continuous flat side-emitting LED backlights

+ click to view all

LTPVR100‑00‑1‑W‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, white, 24V
LTPVR100‑00‑1‑R‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, red, 24V
LTPVR100‑00‑1‑G‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, green, 24V
LTPVR100‑00‑1‑B‑24V	Flat side-emitting LED backlight, 100X100 mm illumination area, blue, 24V

LTBRDC series

Continuous LED bar lights

+ click to view all

LTZPFL120‑00‑6‑W‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, white, 24V
LTZPFL120‑00‑6‑R‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, red, 24V
LTZPFL120‑00‑6‑G‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, green, 24V
LTZPFL120‑00‑6‑B‑24V	LED bar light, 6 LED rows, 120X26.3 illumination area, blue, 24V

LTCXC series

Continuous LED coaxial lights

+ click to view all

LT2QOG100‑00‑X‑W‑24V	LED coaxial light, 100x100 mm light emitting area, white, 24V
LT2QOG100‑00‑X‑R‑24V	LED coaxial light, 100x100 mm light emitting area, red, 24V
LT2QOG100‑00‑X‑G‑24V	LED coaxial light, 100x100 mm light emitting area, green, 24V
LT2QOG100‑00‑X‑B‑24V	LED coaxial light, 100x100 mm light emitting area, blue, 24V

CMBS series

45° beam splitters

+ click to view all

CMBS080

45° beam splitter with mount for 116 mm clamping diameter optics

CMMR series

45° first surface mirrors

+ click to view all

CMMR080

45° first surface mirror for 116 mm clamping diameter optics

WI series

Protective windows

+ click to view all

WI080

Protective window for 116 mm clamping diameter optics

CMHO series

Clamping mechanics

+ click to view all

CMHO080

Clamping mechanics for TCxx072, TCxx080, LTCLHP080-X illuminators and PCxx030XS

Accessories

Accessories and add-ons to make the most of Opto Engineering lenses.

+ click to view all

TCFILTER

Filter mount for telecentric lenses

mvBlueFOX3-2 series

USB3 vision camera with Sony Pregius CMOS sensors

+ click to view all

RT‑mvBF3‑2089a	USB3 Vision camera with Sony Pregius CMOS sensor IMX267
RT‑mvBF3‑2089	USB3 Vision camera with Sony Pregius CMOS sensor IMX255
RT‑mvBF3‑2124a	USB3 Vision camera with Sony Pregius CMOS sensor IMX304
RT‑mvBF3‑2124	USB3 Vision camera with Sony Pregius CMOS sensor IMX253

mvBlueCOUGAR series

GigE & Dual GigE Vision cameras

+ click to view all



RT‑mvBC‑X109b	Camera with interface GigE (1GB/s), sensor size 1", mpixel 8.95, resolution 4112 x 2176, sensor name IMX267, sensor type CMOS
RT‑mvBC‑XD109b	Camera with interface Dual GigE (2GB/s), sensor size 1", mpixel 8.95, resolution 4112 X 2176, sensor name IMX267, sensor type CMOS
RT‑mvBC‑X1012b	Camera with interface GigE (1GB/s), sensor size 1.1", mpixel 12.37, resolution 4112 x 3008, sensor name IMX304, sensor type CMOS
RT‑mvBC‑XD107	Camera with interface Dual GigE (2GB/s), sensor size 1.1", mpixel 7.1, resolution 3216 x 2208, sensor name IMX420, sensor type CMOS
RT‑mvBC‑XD1012b	Camera with interface Dual GigE (2GB/s), sensor size 1.1", mpixel 12.37, resolution 4112 x 3008, sensor name IMX304, sensor type CMOS

COE HR AS-X series

20MP, 26MP and 29MP area scan cameras for high-speed applications

+ click to view all

COE‑200‑M‑POE‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Gray, GigE, 6 fps, POE, C - mount, Glass filter
COE‑200‑C‑POE‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Color, GigE, 6 fps, POE, C - mount, Infrared cut filter
COE‑200‑M‑USB‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Gray, 14 fps, C - mount, Glass filter
COE‑200‑C‑USB‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", Color, 14 fps, C - mount, Infrared cut filter

Company & Resources