Optical specifications
Magnification	(x)	0.369
Image circle Ø	(mm)	21.7
Working distance (1)	(mm)	133.4
wF/# (2)		16
Telecentricity typical (max) (3)	(deg)	<0.08 (0.10)
Distortion typical (max) (4)	(%)	<0.08 (0.10)
Field depth (5)	(mm)	8.8
CTF@ 50 lp/mm	(%)	> 40
Object field of view 8	(mm x mm or Ø)
with IMX174/IMX249 13.3 mm diag w x h 11.35 x 7.13		30.75 x 19.31
with IMX255/IMX267 16.1 mm diag w x h 14.19 x 7.51		38.46 x 20.35
with IMX253/IMX304 17.6 mm diag w x h 14.16 x 10.37		38.37 x 28.11
with IMX387 21.7 mm diag w x h 18.9 x 10.6		51.16 x 28.83
Mechanical specifications
Mount		F
Phase adjustment (9)		Yes
Length (6)	(mm)	228.1
Diameter	(mm)	75
Mass	(g)	899

Last update: 2021-06-22

Notes

Working distance: distance between the front end of the mechanics and the object. Set this distance within +/- 3% of the nominal value for maximum resolution and minimum distortion.
Working F-number (wF/#): the real F-number of a lens when used as a macro. Lenses with smaller apertures can be supplied on request.
Maximum slope of chief rays inside the lens: when converted to milliradians, it gives the maximum measurement error for any millimeter of object displacement. Typical (average production) values and maximum (guaranteed) values are listed.
Percent deviation of the real image compared to an ideal, undistorted image: typical (average production) values and maximum (guaranteed) values are listed.
At the borders of the field depth the image can be still used for measurement but, to get a perfectly sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 5 μm.
Measured from the front end of the mechanics to the camera flange.
With KAI-08050 (22.6 mm diagonal) detectors, the FOV of TC4MHRyyy-x lenses may show some vignetting at the image corners.
For the fields with the indication “Ø =”, the image of a circular object of such diameter is fully inscribed into the detector.

All product specifications and data are subject to change without notice to improve reliability, functionality, design or other. Photos and pictures are for illustration purposes only.

Layout files

Compatible products

Despite the efforts made to generate an error-free compatibility list, we always recommend to consult the Opto Engineering® technical support department before purchasing a compatible product. Opto Engineering® shall not be liable for any damage or malfunctioning caused by the incorrect selection of a compatible product.

LTBC series

Continuous LED backlight

+ View all products

LTBC114114‑W	Continuos LED backlight, 114x114 illumination area, white
LTBC114114‑G	Continuos LED backlight, 114x114 illumination area, green

LTBFC series

Continuous flat side-emitting LED backlights

+ View all products

LTPVR070‑00‑1‑W‑24V	Flat side-emitting LED backlight, 70X70 mm illumination area, white, 24V
LTPVR070‑00‑1‑R‑24V	Flat side-emitting LED backlight, 70X70 mm illumination area, red, 24V
LTPVR070‑00‑1‑G‑24V	Flat side-emitting LED backlight, 70X70 mm illumination area, green, 24V
LTPVR070‑00‑1‑B‑24V	Flat side-emitting LED backlight, 70X70 mm illumination area, blue, 24V
LTPVRG070‑00‑1‑W‑24V	Flat side-emitting LED backlight, thin borders, 70X70 mm illumination area, white, 24V
LTPVRG070‑00‑1‑R‑24V	Flat side-emitting LED backlight, thin borders, 70X70 mm illumination area, red, 24V
LTPVRG070‑00‑1‑G‑24V	Flat side-emitting LED backlight, thin borders, 70X70 mm illumination area, green, 24V
LTPVRG070‑00‑1‑B‑24V	Flat side-emitting LED backlight, thin borders, 70X70 mm illumination area, blue, 24V

LTCLHP series

High-performance telecentric illuminators

+ View all products

LTCLHP048‑R	Telecentric HP illuminator, beam diameter 60 mm, red
LTCLHP048‑G	Telecentric HP illuminator, beam diameter 60 mm, green
LTCLHP048‑B	Telecentric HP illuminator, beam diameter 60 mm, blue
LTCLHP048‑W	Telecentric HP illuminator, beam diameter 60 mm, white

LTCLHP CORE series

Compact telecentric illuminators

+ View all products

LTCLCR048‑R	Telecentric CORE illuminator, beam dimensions Ø = 56; x = 50, red
LTCLCR048‑G	Telecentric CORE illuminator, beam dimensions Ø = 56; x = 50, green
LTCLCR048‑W	Telecentric CORE illuminator, beam dimensions Ø = 56; x = 50, white

LTLAIC series (discontinued models)

Continuous LED low angle diffused ring lights

+ View all products

LT2RZF100‑60‑2‑W‑24V	LED ring light, 2 LED rows, 100 mm outer diameter, 60°, white, 24V
LT2RZF100‑60‑2‑R‑24V	LED ring light, 2 LED rows, 100 mm outer diameter, 60°, red, 24V
LT2RZF100‑60‑2‑G‑24V	LED ring light, 2 LED rows, 100 mm outer diameter, 60°, green, 24V
LT2RZF100‑60‑2‑B‑24V	LED ring light, 2 LED rows, 100 mm outer diameter, 60°, blue, 24V

LTRNST series

LED ring illuminators - straight type

+ View all products

LTRN048RD	Ring LED illuminator, inner diameter 75 mm, straight type, red 630 nm
LTRN048GR	Ring LED illuminator, inner diameter 75 mm, straight type, green 525 nm
LTRN048BL	Ring LED illuminator, inner diameter 75 mm, straight type, blue 470 nm
LTRN048NW	Ring LED illuminator, inner diameter 75 mm, straight type, white

LTLA series

High power strobed LED low angle diffused ring lights

+ View all products

LTLAC2‑R	Diffusive strobed low angle ring light illuminator - large size high power red
LTLAC2‑G	Diffusive strobed low angle ring light illuminator - large size high power green
LTLAC2‑W	Diffusive strobed low angle ring light illuminator - large size high power white

LTLAIC series

Continuous LED low angle diffused ring lights

+ View all products

LT3RZF100‑60‑1‑W‑24V	LED ring light, 1 LED row, 105.2 mm outer diameter, 60°, white, 24V
LT3RZF100‑60‑1‑R‑24V	LED ring light, 1 LED row, 105.2 mm outer diameter, 60°, red, 24V
LT3RZF100‑60‑1‑G‑24V	LED ring light, 1 LED row, 105.2 mm outer diameter, 60°, green, 24V
LT3RZF100‑60‑1‑B‑24V	LED ring light, 1 LED row, 105.2 mm outer diameter, 60°, blue, 24V

LTLADC series

Continuous LED low angle direct ring lights

+ View all products

LTZZO130‑75‑3‑W‑24V	LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, white, 24V
LTZZO130‑75‑3‑R‑24V	LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, red, 24V
LTZZO130‑75‑3‑G‑24V	LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, green, 24V
LTZZO130‑75‑3‑B‑24V	LED low angle ring light, 3 LED rows, outer diameter 131 mm, 75°, blue, 24V

LTBRDC series

Continuous LED bar lights

+ View all products

LTZPFL080‑00‑6‑R‑24V	LED bar light, 6 LED rows, 80X26.3 illumination area, red, 24V
LTZPFL080‑00‑6‑G‑24V	LED bar light, 6 LED rows, 80X26.3 illumination area, green, 24V
LTZPFL080‑00‑6‑B‑24V	LED bar light, 6 LED rows, 80X26.3 illumination area, blue, 24V
LTZPFL080‑00‑6‑W‑24V	LED bar light, 6 LED rows, 80X26.3 illumination area, white, 24V

LTCXC series

Continuous LED coaxial lights

+ View all products

LT2QOG070‑00‑X‑W‑24V	LED coaxial light, 70x70 mm light emitting area, white, 24V
LT2QOG070‑00‑X‑R‑24V	LED coaxial light, 70x70 mm light emitting area, red, 24V
LT2QOG070‑00‑X‑G‑24V	LED coaxial light, 70x70 mm light emitting area, green, 24V
LT2QOG070‑00‑X‑B‑24V	LED coaxial light, 70x70 mm light emitting area, blue, 24V

mvBlueCOUGAR series

GigE / Dual GigE cameras with Smart Features

+ View all products

RT‑mvBC‑XD107	Camera with interface Dual GigE (2GB/s), sensor size 1.1", mpixel 7.1, resolution 3216 x 2208, sensor name IMX420, sensor type CMOS
RT‑mvBC‑X109b	Camera with interface GigE (1GB/s), sensor size 1", mpixel 8.95, resolution 4112 x 2176, sensor name IMX267, sensor type CMOS
RT‑mvBC‑XD109b	Camera with interface Dual GigE (2GB/s), sensor size 1", mpixel 8.95, resolution 4112 X 2176, sensor name IMX267, sensor type CMOS
RT‑mvBC‑X1012b	Camera with interface GigE (1GB/s), sensor size 1.1", mpixel 12.37, resolution 4112 x 3008, sensor name IMX304, sensor type CMOS
RT‑mvBC‑XD1012b	Camera with interface Dual GigE (2GB/s), sensor size 1.1", mpixel 12.37, resolution 4112 x 3008, sensor name IMX304, sensor type CMOS

mvBlueFOX3-2 series

USB3 cameras with Smart Features

+ View all products

RT‑mvBF3‑2089a	USB3 Vision camera with Sony Pregius CMOS sensor IMX267
RT‑mvBF3‑2089	USB3 Vision camera with Sony Pregius CMOS sensor IMX255
RT‑mvBF3‑2124a	USB3 Vision camera with Sony Pregius CMOS sensor IMX304
RT‑mvBF3‑2124	USB3 Vision camera with Sony Pregius CMOS sensor IMX253

COE HR AS-X series

20 - 26 MP area scan cameras

+ View all products

COE‑200‑M‑POE‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", mono, GigE, 6 fps, POE, C - mount, Glass filter
COE‑200‑C‑POE‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", color, GigE, 6 fps, POE, C - mount, Infrared cut filter
COE‑200‑M‑USB‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", mono, 14 fps, C - mount, Glass filter
COE‑200‑C‑USB‑070‑IR‑C	HR Area Scan camera IMX183, CMOS, Rolling shutter, 5472 × 3648, 20.4 MP, 2.4 pix, 1", color, 14 fps, C - mount, Infrared cut filter

CMBS series

45° beam splitters

+ View all products

CMBS048

45° beam splitter with mount for 75 mm clamping diameter optics

CMMR series

45° first surface mirrors

+ View all products

CMMR048

45° first surface mirror for 75 mm clamping diameter optics

WI series

Protective windows for lenses

+ View all products

WI048

Protective window for 75 mm clamping diameter optics

CMHO series

Clamping mechanics for lenses

+ View all products

CMHO048

Clamping mechanics for TCxx048 lenses and LTCLHP048-X illuminators

Company & Resources

Optical imaging technologies OE for the future Who we are A history of innovation Committed to quality Joint ventures Where we are Legal Awards Corporate videos 2D and 3D models Image gallery Video gallery Search OE products by applications Application notes Basics Frequently asked questions Press Review Jobs at Opto Engineering^®

Fiscal code and registration number at Mantova Business Register 02011230204, Nr. REA: MN-216669, Share Capital: 200.000,00 €
Design & development by Opto Engineering® SEO and consulting by Dipiemme Studio

Company & Resources

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT

Company & Resources

Follow us

WE ARE CERTIFIED

ASSOCIATIONS WE SUPPORT